Specifications
Lifting capacity:
Up to 2,000 lbs.
Power:
12 V DC operation, 150-amp fuse at vehicle battery.
Hydraulics:
Single directional hydraulic pump; with locking check valves and dual counter-balance valve. Two, 2-1/2" hydraulic cylinders provide lift rotation of the loading arms.
Crane winch:
Designed for lifting. 1-1/3 horsepower 159:1 gear ration, full-load mechanical brake, 5:1 safety factor. 1,000 lb. single-cable lifting capacity. Cable doubled up for 2,000 pound lift capacity.
Crane cable:
1/4" flexible, 6/36 construction, galvanized 18 feet long with 1-1/2 ton eye-hoist hook with latch. Safe load: 1,400 lbs on a single cable.
Frame:
11-gauge steel, with black-powder-paint finish.
Bearings:
Self-lubricating bronze-sleeve bearings.
Lifting arms:
Combination of structural steel tube and high-strength-structural aluminum with a clear-anodized finish.
Remote control:
4-way control: up, down, in, out. Cable length: 10 feet.
Operating time:
From fully retracted to fully extended position: less than 70 seconds.
Hydraulic fluid:
ATF, OD18, or other clean hydraulic oil with a viscosity of 150 to 300 SUS at 38°C (100°F). Operating temperature range: Normal operating +20°F to 140°F.
System weight:
Less than 450 lbs.Warranty: 2 years on hydraulic pump and motor.
*Specifications and features subject to change without notice as the manufacturer improves products.
|
|
|
